It is the RangeXTD WiFi Extender can be described as the latest-generation WiFi extender. It has powerful capabilities that will boost the speed of the speed of your network. You can stream your favorite movies or play online games at speeds of up to 300 Mbps 2.4 band. It also has two built-in antennas, which offer an extensive range of internet connections.
It also has an LED indicator for signal strength which helps you determine the signal range and also informs the speeds of your WiFi extender. The WiFi signal is able to reach every part of your house , and will eliminate dead spots, by reaching across your entire house.
You can also put your RangeXTD WiFi Extender in any space to get continuous high-range data. It can also be used in smaller offices to provide a better experience for employees. It is easily connected to your router. This means you don’t need to purchase additional routers or new modems to use the wireless range extender.
Secure and Easy Configuration Steps of the RangeXTD WiFi Range Extender:
This RangeXTD WiFi Range Extension can be designed to provide WiFi throughout the whole area. It is suitable for workplaces and homes. It can be connected to any already existing 803.11n wifi signal router and increase the range of the WiFi signal.
The RangeXTD extender is compatible with the 2.4 GHz WiFi connection which provides WiFi speeds of 300 Mbps or more. Its powerful antennas provide a high-quality WiFi performance. It is able to automatically eliminate conflicts by utilizing high-tech features.
RangeXTD Setup:
In this article, we’ll go through the steps to follow for the setup of rangextd. The configuration for the extension is simple and easy. It is possible to set up the extender using five simple ways. Setup is made with buttons WPS wirelessly setting for the extension device, and configuration using an RJ45 cable, in router mode or AP mode.
The configuration is done with the help the WPS button
This is the simplest and fastest method to set up your wireless extender using the use by pressing the WPS. First, you must determine if your router is compatible with it or is not. If you require a stable and secure Internet connection to your router along with a the wireless extender, then you should place the router in an suitable location. The wireless router shouldn’t be that far from your extender. If you have a large space between wireless devices this will cause an issue for you to have an internet connection that is stable.
Examine the LED Status of your extender
It is necessary to find an alternative location to put your router in if its LED light is not blinking. You will need to change the location of the repeater in its repeater setting. Connect your extender to the wall socket, and your router too. Once your router or extender is on, you can turn off it’s WPS Button. The WPS button on the lower part of your router. After that, wait about two to three minutes until the LED light on the router begins flashing. Follow the instructions on screen once the router is turned on.
Configure your RangeXTD extender wirelessly
To set up the extender’s range xtd configuration. The first step is to select it is necessary to select the type of repeater that must be set to the repeater’s location. Turn on the extender by connecting it to the power outlet. After that , click on the icons located on the right from the main screen. There will be the RANGEXTD known as WiFi connection. Click on it and it will be connected automatically after a couple of minutes.
After the launch, open start any internet browser, and then type in your default IP address into the address bar, and then look up the device. Once your login screen is displayed on your desktop, you must comply with the steps as you enter your username and password for WiFi. Enter as an administrator.
Log in to the page on the internet and select the network SSID and a particular password for your router.
Configuration using Rj45 cable
In this stage you must set up your extender by making use by using an Rj45 cable. The first step is to connect your extender to the power source, then turn on your laptops or computers using the Rj45 cable. Then, follow the A3-A6 procedure to configure your device.
Configure the configuration using the AP mode
In this case you’ll be using AP mode to set up the configuration on your amplifier. This method is also known as an access point that wirelessly connects.
It makes use of the device as the final one as a router to communicate with it via AP mode. Therefore, first, you must choose the access point position to set up AP mode. Plug the device into the power outlet and follow A2 through A5 instruction. Following this step you can click on”Apply. The device will reboot itself. Go to your WLAN Settings and then connect the newly created SSID Network name.
Configure using WiFi router mode
In this manner the device is connected via the help of a DSL or cable modem. It will then start functioning as a regular router. It will be set in the same way in the way it’s set up in router mode. Connect your device to the power outlet, and follow the A3 to a6 instructions. Finally, press the router button to confirm successful configuration using the mode of WiFi router.
Review of the RangeXTD WiFi Range Extender
The device functions as plug-and-play. It can be placed on the spot where you can have your main system, like in your living room or even a small office. It will start by plugging into the power outlet and it is ready for use. There is no need for assistance with the installation of the rangextd extension. It’s one of the best features that you can put in your money without further discussion , and the cost is also low when you compare it to other extenders.
